Multifunctional Grain Milling Machine
The grain is put into the pulverizer so that the crushed materials are in the crushing cavity and are collided, knocked, cut and rubbed by the hammer at high speed, as well as the collision and friction between the materials to obtain crushing. The crushed materials fall into the crushing through the screen. In the receiving bag below the cavity. In addition, the machine is equipped with a cooling device. If the continuous crusher can be connected to a water pipe device, the temperature of the crushing chamber can be reduced.
Note: The water cooling device and the outer ring of the crushing chamber, as well as the crushing chamber door cover and the rear wall of the crushing chamber, are artificially set up with a dense cavity, and cold water is injected, and the cold water flows through the crushing chamber, the front door cover cavity, and the rear chamber of the crushing chamber. Then it is discharged out of the cavity, so as to cool the whole pulverizer head and reduce the temperature of the pulverizing cavity.
|Raw material||304 stainless steel||304 stainless steel||304 stainless steel|
If you need further information, please contact us freely, we will do our best to cooperate with you.